COSMETOLOGY
809. DISINFECTING WORK SURFACES, INSTRUMENTS,
MATERIALS AND SUPPLIES:
2. All instruments, materials and supplies used in direct
contact upon a patron, except those which come in contact with blood
or body fluids, require the following treatment:
1. Thorough cleansing of the instruments, materials and supplies with
soap and water or
other detergent immediately after each use, and prior to disinfection,
so as to remove all
foreign material which might harbor bacteria.
2. Each establishment will have and use for disinfection at all times
during business hours, a Wet Disinfectant Container made of glass,
stainless steel, or the type recommended by the manufacturer of the
product it contains.
1. The disinfectant used must be an EPA registered, hospital grade,
bactericidal,
virucidal and fungicidal disinfectant.
2. The solution will be mixed and used according to manufacturer’s
instructions for
dilution and immersion time.
3. The container will be large enough for total immersion of the open
implement and
will contain the appropriate amount of solution for the number of
items to be
disinfected.
4. The container will have a cover in place at all times, labeled
as to its contents, and
be easily accessible to all practitioners.
5. Implements are to be removed from the disinfectant in such a manner
as not to
contaminate the disinfectant solution (using tongs, baskets, and such),
and placed
on a clean dry towel for air drying.
6. Ultraviolet ray cabinets may be used, but are not acceptable as
approved
disinfecting devises. Glass bead sterilizers are not an acceptable
disinfectant.
3. Storage of Disinfected Implements:
1. Disinfected combs, brushes, instruments and accessories will be
kept in a clean,
sanitized, closed receptacle or cabinet when not in use.
III. All tools and implements which have come in contact with blood
or body fluids must be disinfected in the manner stipulated in Rule
809.II., except that the disinfectant must be an EPA registered, hospital
grade, tuberculocidal that is mixed and used according to the manufacturer’s
direction. Disposable items must be discarded immediately, following
the Blood Spill Procedures
as stipulated in Rule 813.
810. DISINFECTING ELECTRIC CLIPPERS AND METAL
INSTRUMENTS
Instruments which cannot be sanitized by the procedures set forth
in Rule 809 will be disinfected by:
I. Thorough cleansing of the working parts of the instruments with
soap and water or other detergent immediately after each use, and
prior to disinfection, so as to remove all foreign material which
might harbor bacteria.
810. Immersion of the working parts of the instruments in a solution
of 70% alcohol for not less than five minutes. Contact points of non-immersible
equipment will be wiped or sprayed with an EPA registered, hospital
grade, bactericidal, virucidal and fungicidal disinfectant.
811. DISINFECTING MANICURE INSTRUMENTS WHILE
IN USE ON A PATRON
1. A solution of 70% alcohol will be readily available during the
manicure. The instruments used on a individual patron will be placed
in the alcohol solution when not actually being employed during the
process of giving a manicure.
2. After use on a patron, the entire set of instruments will be removed
from the work station and cannot be used again until disinfected in
accordance with the procedures set forth in Rule 810 or Rule 809 if
instruments come in contact with blood or body fluids.
812. CLEANING AND DISINFECTING WHIRLPOOL FOOTSPAS.
I. As used in this section, “whirlpool footspa” or “spa” is defined
as any basin using circulating water.
II. Each whirlpool footspa shall be cleaned and disinfected in the
following manner:
A. Before use upon each patron,
1. All water shall be drained and all debris shall be removed from
the spa basin.
2. The spa basin must be cleaned with soap or detergent and water.
3. The spa basin must be disinfected with an EPA-registered disinfectant
with
demonstrated bactericidal, fungicidal, and virucidal activity which
must be used
according to manufacturer’s instructions.
4. The spa basin must be wiped dry with a clean towel.
B. At the end of each day,
1. The screen shall be removed, all debris trapped behind the screen
shall be removed,
and the screen and the inlet shall be washed with soap or detergent
and water.
2. Before replacing the screen, one of the following procedures shall
be performed:
a. The screen shall be washed with a chlorine bleach solution of 1
teaspoon of
5% chlorine bleach to 1 gallon of water, or
b. The screen shall be totally immersed in an EPA-registered disinfectant
with
demonstrated bactericidal, fungicidal, and virucidal activity which
must be
used according to the manufacturer’s instructions.
3. The spa system shall be flushed with low sudsing soap and warm
water for at least
10 minutes, after which the spa shall be rinsed and drained.
C. Every other week (bi-weekly), after cleaning and disinfecting as
provided in Section B. above,
each whirlpool footspa shall be cleaned and disinfected in the following
manner:
1. The spa basin shall be filled completely with water and 1 teaspoon
of 5% bleach for
each 1 gallon of water.
2. The spa system shall be flushed with the bleach and water solution
for 5 to 10
minutes and allowed to sit for 6 to 10 hours.
3. The spa system shall be drained and flushed with water before use
upon a patron.
D. A record shall be made of the date and time of each cleaning and
disinfecting as required by
Sections B. And C., and will indicate whether the cleaning was a daily
or bi-weekly cleaning.
This record shall be made at or near the time of cleaning and disinfecting.
Cleaning and
disinfecting records shall be made available upon request by either
a patron or a board
representative.
E. A violation of this section may result in an administrative fine
and/or disciplinary action. Each
footspa not in compliance with this section may result in a separate
violation.
©
|